Bits and Hammers
We offer a wide range of down bits and hammers that are guaranteed to provide you the best performance. We provide a reliable hammer that would keep your investment low as well as ensure the highest productivity.
Bit Blades
Choose from our bit profiles – Regular Point – Steep Taper or Chisel Bit.
Chisel Bit
All Carbide Bit. Our most aggressive cutting bit.
Directional Bit Range
Regular Point
Steep Taper
Chisel Pint
Button Bit
All Carbide
Steep All Carbide
Bits for Jet Track® Drills
Regular Point
Chisel Bit
Steep Taper
Button Bit
All Carbide
Conical Bit
Steep All Carbide
Bits below are 5/8 inch thick with a 10 degree bend 5 hole pattern.
| Bit Width (inches) | Part Number, Regular Taper 920’s and 1720’s |
Part Number, Steep Taper 920’s and 1720’s |
Part Number, Chisel Point 920’s and 1720’s |
| 3 | 43000 | 43001 | 43002 |
| 4 | 43003 | 43004 | 43005 |
| 5 | 43006 | 43007 | 43008 |
| 6 | 43009 | 43010 | 43011 |
Bits below are ¾ inch thick and have a 10 degree bend 6 hole pattern.
| Bit Width (inches) | Part Number, Regular Taper 2720’s |
Part Number, Steep Taper 2720’s |
Part Number, Chisel Point 2720’s |
| 4 | 43012 | 43013 | 43014 |
| 5 | 43015 | 43016 | 43017 |
| 6 | 43018 | 43019 | 43020 |
Bits below are 1 inch thick have 0 degree bend 6 hole pattern.
| Bit Width (inches) | Part Number, Regular Taper 4020’s and 7020’s |
Part Number, Steep Taper 4020’s and 7020’s |
Part Number, Chisel Point 4020’s and 7020’s |
| 5 | 43021 | 43022 | 43023 |
| 6.5 | 43024 | 43025 | 43026 |
| 8 | 43027 | 43028 | 43029 |
| 9.5 | 43030 | 43031 | 43032 |
Bits in selection are 1 inch thick & 10 degree bend 5 bolt pattern.
| Bit Width (inches) | Part Number Regular Button Bit 920’s and 1720’s | Part Number Steep All Carbide 920’s and 1720’s |
| 3 | 43033 | 43034 |
| 4 | 43035 | 43036 |
| 5 | 43037 | 43038 |
| 6 | 43039 | 43040 |
Bits in the selection below are 1 inch thick & 10 degree bend 6 bolt pattern.
| Bit Width (inches) | Part Number Regular Button Bit 2720’s | Part Number Steep All Carbide 2720’s |
| 4 | 43041 | 43042 |
| 5 | 43043 | 43044 |
| 6 | 43045 | 43046 |
Bits in the selection below are 1 inch thick & 0-degree bend 6 bolt pattern.
| Bit Width (inches) | Part Number Regular Button Bit 4020’s and 7020’s | Part Number Steep All Carbide 4020’s and 7020’s |
| 5 | 43047 | 43048 |
| 6.5 | 43049 | 43050 |
| 8 | 43051 | 43052 |
| 9.5 | 43053 | 43054 |
Bits in selection are 1 inch thick & 10 degree bend 5 hole pattern.
| Bit Width (inches) | Part Number Conical Bit 920’s and 1720’s | Part Number Steep All Carbide 920’s and 1720’s |
| 3 | 43055 | 43056 |
| 4 | 43057 | 43058 |
| 5 | 43059 | 43060 |
| 6 | 43061 | 43062 |
Bits in the selection below are 1 inch thick & 10 degree bend 6 hole pattern.
| Bit Width (inches) | Part Number Conical Bit 2720’s | Part Number Steep All Carbide 2720’s |
| 4 | 43063 | 43064 |
| 5 | 43065 | 43066 |
| 6 | 43067 | 43068 |
Bits in the selection below are 1 inch thick & 0-degree bend 6 hole pattern.
| Bit Width (inches) | Part Number Conical Bit 4020’s and 7020’s | Part Number Steep All Carbide 4020’s and 7020’s |
| 5 | 43069 | 43070 |
| 6.5 | 43071 | 43072 |
| 8 | 43073 | 43074 |
| 9.5 | 43075 | 43076 |
Back to Trenchless Utility Top
Bits for Navigator® Drills
Regular Point
Steep Taper
Chisel Bit
Button Bit
All Carbide
All Bits below for Navigator® drills are 5/8 inch thick & 10-degree bend 7 bolt pattern.
| Bit Width (inches) | Part Number Regular Taper | Part Number Steep Taper | Part Number Chisel Point |
| 3 | 43077 | 43078 | 43079 |
| 4 | 43080 | 43081 | 43082 |
| 5 | 43083 | 43084 | 43085 |
| 6 | 43086 | 43087 | 43088 |
All Bits below are 5/8 inch Thick & 10-degree bend, 7 bolt pattern.
| Bit Width (inches) | Part Number Button Bit | Part Number Steep All Carbide Bit |
| 3 | 43089 | 43090 |
| 4 | 43091 | 43092 |
| 5 | 43093 | 43094 |
| 6 | 43095 | 43096 |
The all carbide bit is inlaid with carbide across the entire face of the bit and further protected with tungsten carbide hard facing. Its our most aggressive cutting bit for heavy cobble and broken rock formation.
Button Bit with its large carbide buttons make this an aggressive cutter in hard-packed clay, shale, and packed gravel.
| Bit Width (inches) | Part Number Button Bit | Part Number Steep All Carbide Bit |
| 3 | 43089 | 43090 |
| 4 | 43091 | 43092 |
| 5 | 43093 | 43094 |
| 6 | 43095 | 43096 |
| Bit Width (inches) | Part Number Button Bit | Part Number Steep All Carbide Bit |
| 3 | 43097 | 43098 |
| 4 | 43099 | 43100 |
| 5 | 43101 | 43102 |
| 6 | 43103 | N/A |
The Steep All Carbide bit is inlaid with carbide across the entire face of the bit and further protected with tungsten carbide hard facing. It’s our most aggressive cutting bit for heavy cobble and broken rock formation and slightly more maneuverable than the regular All Carbide.
The Conical Bit with its large carbide-tipped cutters provides for exceptional penetration in debris.
Back to Trenchless Utility Top
PCD Drilling Bits
Obtain maximum production from our PCD Bits which used worldwide with quality and dependability that is unmatched. Call Tube Technologies and talk with one of our specialists on the critical specifications for your PCD drill bit.
Directional DTH Hammers
Mincon has developed a range of steerable tools over the last decade for hard rock drilling specifically for the Horizontal Directional Drilling Industry. The tools are for use in medium to hard rock formations where an alternative to conventional drilling is required to maintain productivity.
The Mincon Hardrock range offers the most complete line of steerable hammer systems on the market.
- HDD30 – 3 ½” Pilot Bore
- HDD40 – 4 ¼” Pilot Bore
- HDD50 – 5 ¼” Pilot Bore
- HDD60 – 6 ¼” Pilot Bore
Mincon Hardrock Hammer Systems utilize “High-Frequency Cycle” technology. Mincon Hardrock is the only manufacturer of Steerable Hammers that incorporate this feature.
Call Tube Tech at 1 800 – 536 5875 for a quick quote and more details.