Down Hole Hammers & Bits

Down hole hammer and bits

We offer a wide range of downhole hammers that are guaranteed to provide you the best performance. We provide a reliable hammer that would keep your investment low as well as ensure the highest productivity.

Mincon

Mincon range down hold hammers and bits

Hammer series minimum hole size

  • 3″ DTH Series 3.375″ (85mm)
  • 4″ DTH Series 4.375″ (110mm)
  • 5″ DTH Series 5.375″ (136mm)
  • 6″ DTH Series 6″ (152mm)
  • 6″ Heavy Duty DTH Series 6.25″ (159mm)
  • 8″ DTH Series 7.875″ (200mm)
  • 12″ DTH Series 12″ (305mm)
Call us at 1800  536  5875 for Hammer and Bit recommendations.

Back to Civil Construction Top

Concave – Med to Hard formations straight holes.

 concave hammer bit

Convex – Excellent Penetration medium to hard formations.

convex hammer bit

Flat Face – Very hard formations.

Flat face hammer bit

Mincon – Range

Minimum hole size

  • 3″ DTH Series 3.375″ (85mm)
  • 4″ DTH Series 4.375″ (110mm)
  • 5″ DTH Series 5.375″ (136mm)
  • 6″ DTH Series 6″ (152mm)
  • 6″ Heavy Duty DTH Series 6.25″ (159mm)
  • 8″ DTH Series 7.875″ (200mm)
  • 12″ DTH Series 12″ (305mm)

Mincon Hammers are built for drilling applications where high penetration speeds are vitally important and their unique design concept delivers much greater impact energy for maximum drilling performance.

Mincon DTH hammers, are noted for maintaining excellent operating pressure over an extended service life.

Call us at 1 800 536 5875 for Hammer and Bit recommendations.

Back to Civil Construction Top

Down hole hammer

Mincon Foundation Hammers

RC Hammers and Bits: 12”(305mm) to 42”(1067mm). The GXM range of Bolt together RC hammers offer today’s professional contractors the ideal drilling solution for hardrock conditions where ground erosion or disturbance are a major issue.

Mincon foundation hammer

Call us at 1 800 536 5875 and specify your boring specifications and we will guide you to the appropriate Hammer and bit selection.

Back to Civil Construction Top

Mincon Multi Drills

MDX series multi drill

Diameters 49 inch (1250mm) to 118 inches (3000mm)

The MXD range of Multi Drills offers many advantages to the contractor versus other cluster hammer systems available worldwide. The Multi Drill concept works on two basic principles;

  1. High Impact Energy while drilling hard rock
  2. High discharge/flushing capability while drilling hard rock

With a number of high energy RC hammers mounted in the Multi-Drill and the closed-loop RC system the Multi Drill optimizes both the operating and flushing air to maximize penetration and flushing.

The system operates very efficiently on both solid and uneven ground. Due to the unique air porting design when the drill bit in one hammer in the multi drill advances faster than the other bits the live operating air is sealed off to this hammer and diverted to the other hammers in the multi drill. This ensures a constant drilling pressure in the system and maximizes energy.

Back to Civil Construction Top